When register your mobile phone number, you will get a UIM card (User Identity Module) provided by the network operator. With this UIM card, which stores many parameters required for communications, you can use the various functions of the phone and save personal information, including PIN (Personal Identification Number), contact, SMS and other system services. Please use the UIM card carefully. Twisting or pressing it may cause damage. If it is lost, please contact your network operator immediately for help.
When the phone is in conversation status, Mute and Menu are displayed at the bottom of the main screen. Press the left and right softkey to switch between these two options. When you select Mute and press the left softkey, you can turn off the mic in order that the other party cannot hear you but you can still hear him (the mic is still on). At this time, Unmute is shown at the bottom of the screen to indicate mute function is on. Select Unmute and press the left softkey again to turn off the mute function. When you select Menu and press the right softkey, you can access the phone’s main menu for other operations and press the right softkey again to return.
You can input 160 characters at most for one message. The message is sent to the SMS center of the network, then to the targeted receiver by the network. If the targeted receiver does not switch on his phone, the network will store the message temporarily.
In standby status, press down key to access the contact. After access to the phonebook, press up and down keys to view records. When the cursor stops at a certain record, press left softkey to access sub menu for this record.
Symbol input is used for inputting some special symbols and punctuations. In text editing status, long press the key # to change to symbol input method. There are 9 special symbols on the screen for your option. Press the numeric key before the symbol to select the symbol and return to text editing status. If the symbol you need is not displayed on the screen, please press up and down keys on the keypad to scroll the page until you find the symbol you need.
