Ebook Multi-Tech's new voice/fax gateway, the MultiVOIP110.

Welcome to Multi-Tech's new voice/fax gateway, the MultiVOIP, model MVP110. The MVP110 allows analog voice and fax communication over a traditional data communications/data networking digital Internet. Multi-Tech’s new voice/fax gateway technology allows voice and fax communication to be transmitted, with no additional expense, over your existing communications Internet, which has traditionally been data-only. To access this free voice and fax communication, all you have to do is connect the MVP110 to a phone or to your existing in-house phone switch and then to your existing Internet connection. Once configured, the MVP110 allows voice and fax to travel down the same path as your traditional data communications.
The MVP110 supports the H.323sdtandards-based protocol enabling your MVP110 to participate in real-time conferencing with other third-party VOIP Gateways or endpoints that support the H.323 protocol (such as Microsoft NetMeeting® ). The H.323 standard defines how endpoints make and receive calls, how endpoints negotiate a common set of audio and data capabilities, how information is formatted and sent over the network, and how endpoints communicate with their respective Gatekeepers. Gatekeeper software is optional and if present in a network, it typically resides on a designated PC. It acts as the central point for all calls within its zone and provides call control services to all registered endpoints. In addition, Gatekeepers can perform bandwidth management through support for Bandwidth Request, Confirm, and Reject messages. Note: A zone consists of all H.323 endpoints that are under the Gatekeeper’s control. The MVP110 is designed with one voice/fax channel, a 10 Mbps Ethernet LAN interface, and a command port for configuration. System management is provided through the command port using bundled Windows® software which provides easy-to-use configuration menus and a omprehensive Help system.

Preview of this Guide
This guide describes the MVP110 and tells you how to install and configure the unit. The information contained in each chapter is as follows:
Chapter 1 - Introduction and Description
Chapter 1- describes the MVP110 and provides yypical application, describes front panel indicators, back panel connector descriptions, and lists relevant specifications.
Chapter 2 - Installation Chapter 2 provides information on unpacking and cabling your MVP110. The installation procedure describes each cable connection.
Chapter 3 - Software loading and Configuration
Chapter 3 provides instructions for software loading and initial configuration. Later chapters, as well as the online Help, describe the MVP110 software in more detail.
Chapter 4 - MVP110 Software
Chapter 4 describes the MVP110 software package designed for the Windows environment. For explanations and parameters of each element of the user interface, refer to the Help.
Chapter 5 - Remote configuration and Management
Chapter 5 provides procedures for changing the configuration of a remote MVP110. Remote
configuration enables you to change the configuration of a unit by simply connecting two modems between the two MVP110s and remotely controlling the unit. Chapter 5 also describes typical client applications (such as Telnet and Web-based management) used for remote configuration of the MVP110.
Chapter 6 - Warranty, Service and Tech Support Chapter 6 provides instructions on getting service for your MVP110 at the factory, a statement of the limited warranty, information about our Internet presence, and space for recording information about your MVP110 prior to calling Multi-Tech’s Technical Support.

Download Ebook Multi_Tech's new voice_fax gateway_the MultiVOIP 110.